Blast Nozzles

Blast Nozzles

Elcometer supply a wide range of abrasive blast (sandblast) nozzles, including Venturi Blast Nozzles, Double Venturi Blast Nozzles, Water Jet System Blast Nozzles and Angled Liner Blast Nozzles. Each type of abrasive blast nozzle is designed for a specific type of application. Selecting the best abrasive blast nozzle requires careful consideration.

SELECTING AN ABRASIVE BLAST NOZZLE - IT’S AS EASY AS 1, 2, 3 - For more information click here

Elcometer’s range of high-performance abrasive blast nozzles (sandblast nozzles) are both rugged and lightweight and designed to minimise operator fatigue.

Using a larger abrasive blast nozzle (sandblast nozzle) orifice size produces a greater blast coverage area but requires a greater air capacity (cfm or m3/min) to ‘power’ the abrasive blast nozzle (sandblast nozzle).

A smaller abrasive blast (sandblast) nozzle size will typically produce a narrower abrasive blast pattern and consume less air. To maximise the potential benefits of using a larger abrasive blast nozzle diameter it is essential to ‘supply’ the abrasive blast nozzle (sandblast nozzle) with the correct air & media mix at sufficient speed and pressure. The choice of an abrasive blast nozzle (sandblast nozzle) is therefore determined by the available airflow produced by the compressor. If a larger abrasive blast nozzle (sandblast nozzle)  is chosen then to blast efficiently, a higher air capacity is required.