- Home
- Blast Nozzles
- Angled Liner Blast Nozzles
- Tungsten Carbide 45° Angled Liner with Aluminium Jacket
Tungsten Carbide 45° Angled Liner with Aluminium Jacket
The abrasive blast (sandblast) nozzle is ideal for getting inside tight or hard to reach places such as behind flanges, around corners or inside pipes. The angled nozzle is compact, shoots out the abrasive at a 45° angle and has an aluminium jacket providing strength and endurance.
Product Range
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2
2" Contractor Thread
- Orifice Diameter :3.2mm (1/8")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :1
- Part Number :MT28442-2C
1 1/4" NPSM Thread
- Orifice Diameter :1/8" (3.2mm)
- Length :3.26” (83mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :1
- Part Number :MT28442-2N
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2
2" Contractor Thread
- Orifice Diameter :3.2mm (1/8")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :2
- Part Number :MT28443-2C
1 1/4" NPSM Thread
- Orifice Diameter :1/8" (3.2mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :2
- Part Number :MT28443-2N
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2
2" Contractor Thread
- Orifice Diameter :3.2mm (1/8")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :3
- Part Number :MT28444-2C
1 1/4" NPSM Thread
- Orifice Diameter :1/8" (3.2mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :3
- Part Number :MT28444-2N
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3
2" Contractor Thread
- Orifice Diameter :4.8mm (3/16")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :1
- Part Number :MT28442-3C
1 1/4" NPSM Thread
- Orifice Diameter :3/16" (4.8mm)
- Length :3.26” (83mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :1
- Part Number :MT28442-3N
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3
2" Contractor Thread
- Orifice Diameter :4.8mm (3/16")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :2
- Part Number :MT28443-3C
1 1/4" NPSM Thread
- Orifice Diameter :3/16" (4.8mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :2
- Part Number :MT28443-3N
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3
2" Contractor Thread
- Orifice Diameter :4.8mm (3/16")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :3
- Part Number :MT28444-3C
1 1/4" NPSM Thread
- Orifice Diameter :3/16" (4.8mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :3
- Part Number :MT28444-3N
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
2" Contractor Thread
- Orifice Diameter :6.35mm (1/4")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :1
- Part Number :MT28442-4C
1 1/4" NPSM Thread
- Orifice Diameter :1/4" (6.35mm)
- Length :3.26” (83mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :1
- Part Number :MT28442-4N
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
2" Contractor Thread
- Orifice Diameter :6.35mm (1/4")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :2
- Part Number :MT28443-4C
1 1/4" NPSM Thread
- Orifice Diameter :1/4" (6.35mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :2
- Part Number :MT28443-4N
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
2" Contractor Thread
- Orifice Diameter :6.35mm (1/4")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :3
- Part Number :MT28444-4C
1 1/4" NPSM Thread
- Orifice Diameter :1/4" (6.35mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :3
- Part Number :MT28444-4N
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5
2" Contractor Thread
- Orifice Diameter :8mm (5/16")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :1
- Part Number :MT28442-5C
1 1/4" NPSM Thread
- Orifice Diameter :5/16" (8mm)
- Length :3.26” (83mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :1
- Part Number :MT28442-5N
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5
2" Contractor Thread
- Orifice Diameter :8mm (5/16")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :2
- Part Number :MT28443-5C
1 1/4" NPSM Thread
- Orifice Diameter :5/16" (8mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :2
- Part Number :MT28443-5N
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5
2" Contractor Thread
- Orifice Diameter :8mm (5/16")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :3
- Part Number :MT28444-5C
1 1/4" NPSM Thread
- Orifice Diameter :5/16" (8mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :3
- Part Number :MT28444-5N
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
2" Contractor Thread
- Orifice Diameter :9.5mm (3/8")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :1
- Part Number :MT28442-6C
1 1/4" NPSM Thread
- Orifice Diameter :3/8" (9.5mm)
- Length :3.26” (83mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :1
- Part Number :MT28442-6N
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
2" Contractor Thread
- Orifice Diameter :9.5mm (3/8")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :2
- Part Number :MT28443-6C
1 1/4" NPSM Thread
- Orifice Diameter :3/8" (9.5mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :2
- Part Number :MT28443-6N
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
2" Contractor Thread
- Orifice Diameter :9.5mm (3/8")
- Length :88mm (3.46")
- Entry Diameter :25mm (0.98")
- Thread Type :51mm (2") Contractor
- Number of Holes :3
- Part Number :MT28444-6C
1 1/4" NPSM Thread
- Orifice Diameter :3/8" (9.5mm)
- Length :3.46" (88mm)
- Entry Diameter :0.98" (25mm)
- Thread Type :11/4" (32mm) NPSM
- Number of Holes :3
- Part Number :MT28444-6N
Technical Specification
| Part Number 2" Contractor Thread |
Nozzle No. | Orifice Diameter | Number of Holes | Length | Entry Diameter |
| MT28442-2C | #2 | 3.2mm (1⁄8") | 1 | 88mm (3.46”) | 25mm (0.98”) |
| MT28443-2C | #2 | 3.2mm (1⁄8") | 2 | 88mm (3.46”) | 25mm (0.98”) |
| MT28444-2C | #2 | 3.2mm (1⁄8") | 3 | 88mm (3.46”) | 25mm (0.98”) |
| MT28442-3C | #3 | 4.8mm (3⁄16") | 1 | 88mm (3.46”) | 25mm (0.98”) |
| MT28443-3C | #3 | 4.8mm (3⁄16") | 2 | 88mm (3.46”) | 25mm (0.98”) |
| MT28444-3C | #3 | 4.8mm (3⁄16") | 3 | 88mm (3.46”) | 25mm (0.98”) |
| MT28442-4C | #4 | 6.35mm (1⁄4") | 1 | 88mm (3.46”) | 25mm (0.98”) |
| MT28443-4C | #4 | 6.35mm (1⁄4") | 2 | 88mm (3.46”) | 25mm (0.98”) |
| MT28444-4C | #4 | 6.35mm (1⁄4") | 3 | 88mm (3.46”) | 25mm (0.98”) |
| MT28442-5C | #5 | 8mm (3⁄16") | 1 | 88mm (3.46”) | 25mm (0.98”) |
| MT28443-5C | #5 | 8mm (3⁄16") | 2 | 88mm (3.46”) | 25mm (0.98”) |
| MT28444-5C | #5 | 8mm (3⁄16") | 3 | 88mm (3.46”) | 25mm (0.98”) |
| MT28442-6C | #6 | 9.5mm (3⁄8") | 1 | 88mm (3.46”) | 25mm (0.98”) |
| MT28443-6C | #6 | 9.5mm (3⁄8") | 2 | 88mm (3.46”) | 25mm (0.98”) |
| MT28444-6C | #6 | 9.5mm (3⁄8") | 3 | 88mm (3.46”) | 25mm (0.98”) |
| Part Number NPSM Thread |
Nozzle No. | Orifice Diameter | Number of Holes | Length | Entry Diameter |
| MT28442-2N | #2 | 1⁄8" (3.2mm) | 1 | 3.26” (83mm) | 0.98” (25mm) |
| MT28443-2N | #2 | 1⁄8" (3.2mm) | 2 | 3.46” (88mm) | 0.98” (25mm) |
| MT28444-2N | #2 | 1⁄8" (3.2mm) | 3 | 3.46” (88mm) | 0.98” (25mm) |
| MT28442-3N | #3 | 3⁄16" (4.8mm) | 1 | 3.26” (83mm) | 0.98” (25mm) |
| MT28443-3N | #3 | 3⁄16" (4.8mm) | 2 | 3.46” (88mm) | 0.98” (25mm) |
| MT28444-3N | #3 | 3⁄16" (4.8mm) | 3 | 3.46” (88mm) | 0.98” (25mm) |
| MT28442-4N | #4 | 1⁄4" (6.35mm) | 1 | 3.26” (83mm) | 0.98” (25mm) |
| MT28443-4N | #4 | 1⁄4" (6.35mm) | 2 | 3.46” (88mm) | 0.98” (25mm) |
| MT28444-4N | #4 | 1⁄4" (6.35mm) | 3 | 3.46” (88mm) | 0.98” (25mm) |
| MT28442-5N | #5 | 3⁄16" (8mm) | 1 | 3.26” (83mm) | 0.98” (25mm) |
| MT28443-5N | #5 | 3⁄16" (8mm) | 2 | 3.46” (88mm) | 0.98” (25mm) |
| MT28444-5N | #5 | 3⁄16" (8mm) | 3 | 3.46” (88mm) | 0.98” (25mm) |
| MT28442-6N | #6 | 3⁄8" (9.5mm) | 1 | 3.26” (83mm) | 0.98” (25mm) |
| MT28443-6N | #6 | 3⁄8" (9.5mm) | 2 | 3.46” (88mm) | 0.98” (25mm) |
| MT28444-6N | #6 | 3⁄8" (9.5mm) | 3 | 3.46” (88mm) | 0.98” (25mm) |
Downloads
