Water Jet System Blast Nozzles

Water Jet System Blast Nozzles

This abrasive blast nozzle includes a water jet system which mixes water with the abrasive inside a chamber within the jacket, reducing the amount of dust placed into the atmosphere. Ideal for harder abrasives, when dust control is needed during an abrasive blast project.

View as Grid List

1 Item

Set Descending Direction

SELECTING AN ABRASIVE BLAST NOZZLE - IT’S AS EASY AS 1, 2, 3 - For more information click here

Elcometer’s range of high-performance abrasive blast nozzles (sandblast nozzles) are both rugged and lightweight and designed to minimise operator fatigue.

Using a larger abrasive blast nozzle (sandblast nozzle) orifice size produces a greater blast coverage area but requires a greater air capacity (cfm or m3/min) to ‘power’ the abrasive blast nozzle (sandblast nozzle).

A smaller abrasive blast (sandblast) nozzle size will typically produce a narrower abrasive blast pattern and consume less air. To maximise the potential benefits of using a larger abrasive blast nozzle diameter it is essential to ‘supply’ the abrasive blast nozzle (sandblast nozzle) with the correct air & media mix at sufficient speed and pressure. The choice of an abrasive blast nozzle (sandblast nozzle) is therefore determined by the available airflow produced by the compressor. If a larger abrasive blast nozzle (sandblast nozzle)  is chosen then to blast efficiently, a higher air capacity is required.

View as Grid List

1 Item

Set Descending Direction