Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of ¹⁄₂" (13mm) and are supplied with a nylon nozzle holder and a cast iron quick coupling with ³⁄₄" fine threads. The following Elcometer blast hose assemblies come complete with:

• Blast Hose
• Twinline Pneumatic Remote Control Hose
• DMH II Deadman’s Handle
• Nozzle Holder
• Quick Coupling

2 Ply Braid Reinforcement

Elcometer’s blast hose features highly woven cord linings in a 2 ply cross pattern to improve hose strength and allow flexibility.

Tough Outer Cover

Manufactured using abrasion resistant and anti-static natural and styrene-butadiene rubber with a cloth impression, the tough weather resistant cover prolongs the life of the hose.

Anti-Static and Abrasion Resistant Inner Wall

The Elcometer blast hose is manufactured out of natural and styrene-butadiene rubber compound with carbon black, has an abrasion resistance value of 50mm³ in accordance with DIN53516 and has an anti-static rating (R) of R<10⁶ Ω/m. This dissipates static electricity to the ground to protect the blaster from injuries caused by a static shock.